taigdividinghead

2000年2月18日—Afewyearsago,IbuiltasimpledividingheadfortheTaiglathe.ThisMkIdesignwasbasedona1MTdrillchuckarborthatIhadturned ...,2000年3月20日—Adividingheadgenerallyconsistsofa40:1or60:1wormdrive,withtheinputshaftdrivingtheworm,andthewormwheeldrivingtheoutput ...,2021年6月8日—BeforestartingthenextengineprojectIdecidedtobuildadivingheadthatcanbeusedoneithermyTaigmillorlathe.,2009年8月15日—Hiall...

參考資訊如下
A Comprehensive Dividing Capability for the PeatolTaig ...

2000年2月18日 — A few years ago, I built a simple dividing head for the Taig lathe. This Mk I design was based on a 1MT drill chuck arbor that I had turned ...

A Dividing Head for the Taig (Peatol) Lathe

2000年3月20日 — A dividing head generally consists of a 40:1 or 60:1 worm drive, with the input shaft driving the worm, and the worm wheel driving the output ...

A small dividing head

2021年6月8日 — Before starting the next engine project I decided to build a diving head that can be used on either my Taig mill or lathe.

Dividing head for Taig lathemill

2009年8月15日 — Hi all. Having choked after looking at the prices of factory-made gears, I've decided that I really need to learn to cut my own.

FILE0032 Part 14 Modifying Dividing Head Adaptor ...

Homemade Taig Lathe Dividing Head

2017年6月28日 — 28-jun-2017 - Homemade dividing head intended for use with a Taig lathe. Main shaft accepts chucks and threaded arbors. Gear ratio is 100:1.

Simple dividing head

This will let a drill chuck or a threaded arbor mount up tight to a true surface, similar to the way the Taig chuck mounts to the spindle. The excess has been ...

Simple dividing head

This will let a drill chuck or a threaded arbor mount up tight to a true surface, similar to the way the Taig chuck mounts to the spindle. The excess has been ...